Projects
There are 255 results.
Sani60ies - Demonstration of minimally invasive thermal and energetic refurbishment of classic 1950s and 1960s apartment buildings
System development of a façade-integrated building component activation for "warm" refurbishments with high transfer potential to buildings of classic apartment complexes from the 1950s and 1960s. The system is being tested and further developed based on three building projects and demonstrated through broad application (over 200 flats).
SeiersbergPirka2040 - #wirsindzukunft: Roadmap for a climate-neutral future in Seiersberg-Pirka
Seiersberg-Pirka is the second largest municipality in the district of Graz-Umgebung and was created in the course of the Styrian municipal reform in 2015 by merging the previously independent municipalities of Seiersberg and Pirka. The municipality is located south-west of the provincial capital Graz and is one of the fastest growing municipalities in Austria.
SlagShot
Investigation and analysis of the possible admixture of EAF slags as cement replacement in shotcrete applications for filling spandrels. In collaboration with circular economy expert Thomas Romm ZT, promising results are being tested for application at WienerLinien construction sites.
Smart & Urban Tree - Exploring integrative possibilities of structures for urban shading
The project "Smart & Urban Tree" explores large-scale artificial structures, which may serve as a supplementary alternative to other greening measures, such as trees and facade greenery, in dense urban contexts, where traditional concepts cannot be applied in a satisfactory manner. Such structures offer a wide-range of to-be integrated functions and can contribute to mitigation of urban heat islands.
SmartCity Baumgarten - Demonstration of an anergy network and implementation of climate-friendly solutions in existing districts
Implementation of a cross-property anergy network for the supply of heating, cooling and electricity in an existing neighbourhood. With this demonstration project, a technical-legal alternative for areas outside of district heating supply is developed, which makes it possible for neighbourhoods to join together to use renewable energies in common.
Sophokles - Solar shading lamellas with photovoltaic coating for climate-neutral, energy-efficient structures
Development of lightweight, strip-like photovoltaic modules that combine shading and emission-free power generation in one monolithic component. The size and module voltage of the photovoltaic blinds can be individually adapted to the conditions of the building. The core of the innovation is an interconnection concept for thin-film solar cells, with which the film-like photovoltaic material can be interconnected in series and in parallel as required.
Stadtwandel - sustainable transformation and climate change adaptation of town and city centers
Stadtwandel aims to initiate sustainable transformation in small cities and municipalities.
StatiPLANT - Exploration of a standardized model for the static assessment of climbing plants
The StatiPLANT project aims to systematically record and analyze static loads on vertically greened facades caused by climbing plants under the influence of wind, tensile forces, and dead loads of the plants. The goal is to develop a conceptual, parameterizable assessment model as the basis for a standardized design procedure in structural engineering.
Steyr 2040 climate neutrality roadmap - a city positions itself
The project will develop a climate neutrality roadmap for the city of Steyr on the basis of an energy and climate balance sheet to be drawn up.
Storage Cascade MZ: Storage cascade system to establish urban PLUS energy systems on the example of the city of Mürzzuschlag
In the "Storage Cascade MZ" project, battery storage systems are implemented on different grid levels in the city of Mürzzuschlag, whose measurement data enable an integrated grid monitoring and create the basis for a future expansion of the nominal power of photovoltaic (pv) systems.
SuperQ3 – Neighborhood demonstration of a superblock in the Dreiheiligen district, Innsbruck
SuperQ3 is the first scientifically supported demonstration of the superblock concept in Innsbruck as a model for climate-neutral neighborhood development. The project combines traffic calming, improved environmental and residential quality, and participatory transformation in the district of Dreiheiligen. It will deliver transferable urban modules, practical guidelines, and evidence-based findings for further neighborhoods.
SüdSan - Socially acceptable, climate-compatible refurbishment of two multi-family-houses as a model for the refurbishment of the Südtiroler-Siedlung Bludenz
Planning, energetic-economic optimisation, construction and monitoring of the costs, comfort and energetic performance of two socially acceptable and climate-target-compatible refurbished smaller apartment buildings in the Südtiroler-Siedlung Bludenz.
TEA-PUMP – Techno-economic Analysis of Thermoelectric Modules for Efficiency and Performance Enhancement in Heat Pumps for Residential Buildings
The TEA-Pump project explores the innovative use of thermoelectric elements (TEM) in compression heat pumps to enhance their efficiency and performance. Through a comprehensive techno-economic analysis, promising heat pump (HP) configurations for use in urban multi-family housing are identified. The project makes a significant contribution to the decarbonization of heating and cooling supply and supports the development of climate-neutral cities through energy-efficient, future-oriented heat pump technologies.
TOPS – Topology-optimised reinforced concrete slabs with digital formwork and reinforcement
The TOPS project is investigating material-efficient ribbed concrete slabs, which save up to 50% of the concrete used in conventional flat slabs by topology-optimisation. A 'file-to-factory' process enables the automated production of formwork and reinforcement using digital technologies. The construction method reduces CO₂ emissions and contributes to the decarbonisation of the construction industry.
Tariffs4all - Participation of the citizens from Bruck in the energy transition for all
The project responds to the challenges of participation in the energy transition in the municipality of Bruck/Mur by exploring the possibilities of Power Purchase Agreements (PPAs), Peer to Peer Trading (P2P Trading) and virtual metering points for generation plants be developed and implemented as a basis for new tariff/financing models.
Ternitz 2040
The municipality of Ternitz has been a Climate Alliance municipality since 1991, a member of the KEM Schwarzatal region since 2010/2011, an e5 municipality (with 4e) from 2011 to 2024, and was awarded the title "Energie.Vorbild.Gemeinde" in June 2023 within the LEADER region NÖ-Süd. Key focus areas include the expansion of photovoltaics, the promotion of walking, cycling, public transport and e-mobility, energy efficiency in the public sector, the use of synergies with local industry, and the implementation of energy-efficient residential building concepts.
Testbed for impact analysis with all 10 major pioneer cities
As part of this pilot project, ten large pioneering cities in Austria are testing a uniform, data-based method for evaluating, planning and managing their climate neutrality roadmaps. The aim is to analyse the impact of measures in a structured manner and to make the transition to climate neutrality more efficient.
Thannhausen 2.0 - Thannhausen energy district: a role model and testbed for a renewable energy supply for neighbourhoods
Evaluation and testing of different energy distribution approaches in a neighbourhood using direct lines, storage or new legal options through the ElWG (Electricity Industry Act). The project builds on the existing direct line system in Thannhausen and will test different use cases for the (climate-neutral) supply of neighbourhoods there.
TheSIS - Thermal renovation with internal insulation systems - investigation and development of moisture-proof solutions
Development of innovative solutions for the retrofit of the building envelope with internal insulation with a focus on the hygrothermal optimization of a moisture-adaptive vapor retarder in form of a paint coating. As a result, the moisture hazard related to the implementation of internal insulation systems is reduced and the energetic, comfort-related and economic advantages are made available.
ThermEcoFlow: Innovative technologies and methods for indoor air comfort and energy optimisation in thermal spa buildings
ThermEcoFlow aims to optimize the energy consumption of thermal spas facilities through improved simulation models and AI-supported control systems. By precisely modelling airflow, humidity loads, and evaporation, combined with AI-driven regulation, the project seeks to reduce energy consumption and CO₂ emissions in the long term while enhancing indoor comfort for visitors.