Research Projects
There are 56 results.
GreenGEO - Data-based integration of climate change adaptation measures into spatial planning
Green and blue infrastructure (GBI) is a key instrument in the fight against climate change. Nevertheless, deciding where and in what form it should be used most effectively remains a challenge in spatial planning practice. The development of a digital model that links location-specific climate risk data with suitable GBI measure proposals will make this much easier and more objective.
FluccoSan - Circular energy flexibility for resilient, climate-neutral refurbishments
FluccoSan aims to develop innovative and cost-effective refurbishment solutions for the building sector that contribute to achieving the Austrian federal government's climate targets. The focus is on energy-efficient, minimally invasive and socially acceptable measures, so-called “dynamic renovations”. By integrating the circular economy and social science research, these solutions should ensure long-term sustainability and a high level of acceptance among users. Status: ongoing
ReAssuRe – risk management for re-use of construction components and building technology by non-destructive on-site testing procedures
Risk assessment and insurability is essential for the re-use of functional components in buildings. In the best case, properties of components can be examined before they are removed from the donor building. ReAssuRe identifies suitable on-site testing procedures and establishes a network for the quality assurance of re-use components.
Climate Scan District - Exploration and evaluation of potential districts regarding their suitability as a pioneer district
The "Climate Scan District" project aims to select the most suitable pioneer district in Dornbirn by applying the klima:aktiv criteria catalog for climate-neutral districts. This supports the city's transformation to climate neutrality by 2040. Extensive district profiles, action plans, and future visions are developed to create a well-founded and comprehensive basis for decision-making.
Earthen building 2.0: Earthen building of the future - The art of craftsmanship based on engineering approaches
The exploratory project investigates the suitability of fiber optic sensors for the long-term monitoring of the deformation behavior of rammed earth wall elements under moisture and temperature fluctuations (shrinkage) as well as loads (creep). The experimental findings will be integrated into a finite element model to simulate failure behavior under load.
RCC2 - Life cycle assessment of heatable formwork for CO2-reduced and climate-neutral concrete
Experimental development of innovative formulations of CO2-reduced concrete and heated formwork to support early strength development in wintry temperatures.
ThermEcoFlow: Innovative technologies and methods for indoor air comfort and energy optimisation in thermal spa buildings
ThermEcoFlow aims to optimize the energy consumption of thermal spas facilities through improved simulation models and AI-supported control systems. By precisely modelling airflow, humidity loads, and evaporation, combined with AI-driven regulation, the project seeks to reduce energy consumption and CO₂ emissions in the long term while enhancing indoor comfort for visitors.
ZplusB - Zinzendorfgasse plus Brunngasse – Joint user groups in a historic building block in Graz
The exploratory project ZplusB is developing an innovative renovation approach that is jointly supported by owners and user groups. The aim is to develop a cooperation agreement as a basis for investment in the renovation.
sewageENERGYrecovery - Performance comparison of different wastewater heat recovery systems for renewable heat generation
Independent detailed testing of the performance and efficiency of different wastewater heat recovery systems in actual operation by analysing measurement data. Evaluation of the analysed systems with regard to their optimal application possibilities.
GREEN Stone: development of a cement-free concrete with recycled content for applications in landscaping
The Green Stone project aims to develop geopolymer concrete with recycled materials in order to reduce the consumption of non-renewable resources and replace the cement content with alternative binders. The landscaping industry in particular requires lightweight, durable and weather-resistant materials.
RST Reloaded - Flexibilisation of the urban power supply system by adapting the existing ripple control system
"RST reloaded" utilises existing ripple control technology (RST) to activate flexible loads in a targeted manner to benefit the grid and thus create capacities for more renewable energy in urban electricity grids. The aim is to analyse technical potential and user acceptance in equal measure and validate them in an implementation. The approach is scalable, legally compliant and transferable to other municipal utilities.
Klimagärten³ - Biodiverse, CO2-saving, close to nature: climate gardens³ for Austria's garden future
The Klimagärten³ project is dedicated to the climate-friendly design of gardens and green spaces in Austria. The focus is on activating the previously untapped climate protection potential of private and public gardens. Through research, practical trialling and social networking, ways are shown in which gardens can act as CO₂ sinks and strengthen biodiversity.
KlimaQuartierNikolai
The project aims to improve sustainable energy supply and energy efficiency for the planned NikolaiQuartier in Villach by utilizing waste heat and local energy sources. An innovative energy concept, which also includes the regional hospital, is being developed. Active involvement of residents and stakeholders is key to securing acceptance of the eco-friendly neighbourhood.
10., Rothneusiedl - climate model district Rothneusiedl: Preparation for the planned EU mission "New European Bauhaus"
Rothneusiedl will become a pioneering district for climate protection, climate adaptation and the circular economy. The existing RothNEUsiedl Charter outlines nine principles for making the district climate-friendly and inclusive. The dialogical and integrated process involves various target groups, including the planning and construction industry, future residents and businesses, in order to establish a local building culture at an early stage. NEB working principles are applied in order to support the parallel mission statement process.
BIM.sustAIn - Artificial Intelligence to enhance sustainability in BIM projects
The construction sector faces growing challenges in meeting sustainability requirements, particularly during early project phases where key decisions on materials, construction methods, and energy concepts are made. This project aims to leverage AI and BIM to optimize sustainability assessments by providing precise CO₂ balance forecasts and material suggestions. The innovative approach reduces manual effort and supports the implementation of climate-neutral construction, contributing significantly to Austria’s climate goals.
FlexHP - AI-supported control models for optimising the flexibility of heat pumps to reduce the load on the electricity grid
Development of a new type of energy management system for heat pumps that enables methods for intelligent heat pump operation and thus maximises flexibility. This requires forecast-based models for control that utilise technologies such as machine learning.
GreenFDT – Green Façade Digital Twin
In an interdisciplinary framework, the possibilities for optimizing the rear ventilation distance of façade greening elements and their potential impact on indoor and urban climate are being investigated. The precise and comprehensive investigation of these relationships is made possible by the extensive deployment of sensors and measuring tools and furthermore the development and integration of a digital twin in a BIM model.
Vitality City - Holistic energy strategies for cities in transition
Energy simulation of any size city (municipalities) based on the data from laser scanning and satellite analysis (Geodata) to obtain dynamical energy demands and available energy resources.
IMPACT – Hybrid hydraulic and electric charging of stratified compact hot water
The IMPACT project is developing an innovative decentralised hot water storage technology for large-volume urban housing. Thanks to a novel, flat design, the system enables highly efficient utilisation of renewable energy sources such as heat pumps and photovoltaics. The aim is to create a cost-efficient, sustainable solution for decarbonising water heating that is optimised using intelligent energy management and machine learning methods.
MARGRET - Measurement of greened/non-greened objects for the adaptation of calculation models
Development of measurement methods to determine the influence of greening measures on greened versus non-greened reference objects with contemporary building standards under uniform framework conditions. Proposals for adaptations of calculation models or standards to e.g. enable an integration in the energy performance certificate.