Projects
There are 36 results.
2-K3 - Prototypical demo project for the concretization and compatibility of 3C and affordability in residential construction
The R&D project 2-K3, based on the concrete demonstration project "Wiener Luft" at the former Vienna Nordwestbahnhof (Northwest Railway Station), addresses the question of how the three Cs of climate protection, climate change adaptation, and the circular economy can be fully implemented in a prototypical, affordable, subsidized Viennese housing project.
3D*3B - 3D-Concret Printing, Reinforcement for low carbon and bending stressed structures.
The project is about 3D printed structural elements and their integration in building structures. The focus is predominantly set on bending stresses structural elements like panels and slabs. Results will point out technical, logistic and climate relevant aspects.
BIOCHARm - Assessing the Potential of Biochar in Construction as a Contribution to Climate Neutrality
The project investigates the potential and limits of the use of biochar in the Austrian construction sector. The participating organisations gain valuable insights into the availability and suitability of biogenic material flows, the possible uses of biochar and the possibility of storing atmospheric carbon in the construction sector.
C-Hub - Circular Knowledge Hub
The Circular Knowledge Hub is as a central knowledge hub, combining existing expertise, translating complex regulatory developments into applicable options for action, and connecting stakeholders along the entire value chain. Through structured dialogue formats, quality-assured knowledge modules, and cross-sector cooperation, it strengthens the implementation of circular principles in practice and policy. The goal is a systemic shift toward a resource-efficient, climate-neutral, and resilient construction industry.
Circular Twin - A Digital Ecosystem for the Generation and Evaluation of Circular Digital Twins
By 2030, more than the equivalent of two Earths will be needed to meet the demand for natural resources, therefore a transition to circular systems is essential, especially in the construction industry. The digital "Circular Twin" ecosystem enables the early implementation of circular economy goals as well as end-to-end digitalization in construction utilizing Digital Twins, Generative Design Algorithms and Virtual Reality.
CircularBioMaterials
ParaStruct GmbH explores the technical and economic possibilities of recyclable, mineral-bound biomaterials in the project. The result is a basis for further development work and investments in this area.
Climate Quarter Melk
Radical and comprehensive transformation of a city quarter in the small town of Melk, Lower Austria, involving the areas of urban planning, landscape architecture, traffic planning and co-creation - demonstrated by the implementation and rededication of a parking lot to an urban, inner-city climate forest within project life-time.
DREI x NULL = NULL - Research project on climate-neutral construction in all life cycle phases based on three demonstration buildings
The aim of the F&E project is the realization of three different residential buildings, which are all climate-neutral in the life cycle phases of construction, operation and dismantling. The aim is to create exemplary showcase projects for the future residential construction sector.
DiCYCLE - Reconsidering digital deconstruction, reuse and recycle processes using BIM and Blockchain
DiCYCLE aims at identifying, analysing and mapping current End-of-Life processes in the building industry, as well as optimizing those for digitalization, using BIM, Blockchain and Smart Contracts. The goal is to enable sustainable digital planning, construction and deconstruction workflows for reuse and recycling of building materials and components along the life cycle.
Digi-HBV - Topology-optimised reinforced concrete slabs with digital formwork and reinforcement
Digi-HBV delivers a reusable, material-efficient floor system that combines ecological impact with industrial feasibility. Core innovations include interlocking, CNC-milled timber dowels for the timber–concrete interface, demountable joints to ensure in-plane (diaphragm) action, and a generative, LCA-coupled file-to-factory workflow. Full-scale load tests verify load-bearing capacity, durability, and demountability. The outcome: at least 50% lower manufacturing emissions, significantly shorter construction times, and a scalable product for climate-neutral, circular construction.
DigiHemp/ Digital technologies for quality assurance and performance enhancement of hemp-based building materials
Development of digital methods for describing, predicting and optimizing the thermal/mechanical properties of composite materials made from bio-based raw materials. Taking into account the complex material morphology as well as the properties of the components for the prediction of building material properties, the overall goal of increasing the use of bio-based building materials shall be achieved.
Favorite Facades Reuse
The exploratory project "Favorite Facade ReUse" has set itself the goal of renovating and thermally upgrading buildings with curtain facades with a maximum proportion of reuse and the greatest possible protection of the residents. The authenticity of the building is preserved, and CO2 emissions are minimized.
FluccoSan - Circular energy flexibility for resilient, climate-neutral refurbishments
FluccoSan aims to develop innovative and cost-effective refurbishment solutions for the building sector that contribute to achieving the Austrian federal government's climate targets. The focus is on energy-efficient, minimally invasive and socially acceptable measures, so-called “dynamic renovations”. By integrating the circular economy and social science research, these solutions should ensure long-term sustainability and a high level of acceptance among users. Status: ongoing
GREEN Stone: development of a cement-free concrete with recycled content for applications in landscaping
The Green Stone project aims to develop geopolymer concrete with recycled materials in order to reduce the consumption of non-renewable resources and replace the cement content with alternative binders. The landscaping industry in particular requires lightweight, durable and weather-resistant materials.
Green BIM 3 - Tools for Standardised Data Integration of BIM and Digital Twins, Including Ecosystem Services
The project aims to enhance the availability and integration of BIM data, ecological parameters, and other relevant information into the workflows of the green sector. To achieve this, a web-based application with suitable interfaces will be developed. The foundation for this is a detailed requirement specification, which will be established through interviews, workshops, and research, linking the individual components of the application.
JAKUB & LEVI - Development of an Innovative Climate-Neutral Neighborhood in the Settlement Area
"Jakub & Levi" is a transdisciplinary project developed for underutilized parish and community properties in the center of Unterretzbach. It combines innovative housing and usage concepts with mobility alternatives, sustainable energy supply, and the use of local materials. Established social structures from the village community are adopted and enriched with urban living concepts. The project provides a transferable model for sustainable neighborhood development in rural regions.
KLIMADEMO VIS-A-VIS: Participatory realization of a climate-neutral demonstration building Vis-à-Vis
Participatory development of a pilot project at the interface between climate neutrality, affordability and multi-storey wooden housing based on well-founded decision-making bases in terms of renewable materials and renewable energies. The result is a multipliable carbon neutral building and the dissemination of carbon neutrality know-how to a larger audience.
KaTaSi - Exploratory Project: Opportunities for the Renovation and Upgrading of the Kanaltaler Settlement in St. Veit
With this exploratory project, the city of St. Veit aims to establish a best practice – preserving existing qualities and adding new ones, addressing structural, physical, urban planning, architectural, and other challenges – while ensuring ecological, social, and economic sustainability.
LehmKur - Rammed earth walls for multi-storey residential buildings
Research of a lighthouse project consisting of rammed earth-timber exterior wall components with accompanying ecological life cycle analysis, building physics simulations and documentation of the necessary logistical, building law, fire and soundproofing measures.
MADOKLI - Mannersdorf climate fit! Using local resources to combat and adapt to climate change for a climate-neutral neighbourhood
Development of a climate-neutral neighbourhood by integrating previously unused heat sources and sinks, such as the underground Mühlbach stream, to supply municipal buildings, to establish use-oriented water management and to develop solutions for climate-friendly outdoor spaces in the centre of Mannersdorf am Leithagebirge.